Chapter 2 Front Panel Operation RIGOL
User’s Guide for DSA800/E Series
Print
Press
to save or print the current screen.
Key Points:
When a printer is currently connected, press this key and the analyzer prints
the current screen image according to the print settings (please refer to the
introduction in “Print Setup”).
If a USB storage device rather than printer is currently connected, press this
key and the analyzer switches to the storage and recall interface. You can
save the current screen data (with the specified filename) in “.bmp”, ".jpg" or
".png" format under the specified directory in the USB storage device.
If the key is pressed when neither a printer nor a USB storage device is
successfully connected, “Missing media” is displayed and the operation is
ignored.
To Next Page
Loading...
Need help?
General
