Fully open type set-top box remote
control
HOW TO OPERATE
1. Press the Set1/Set2 of “Riimini ” in 3 seconds,
the Riimini 's light will be flash one time then
long-time on;
2. Aim the Riimini 's infrared LED at your original
remote control's infrared LED in parallel
alignment (PS: the relative distance not more
than 7 cm), then press any button on Riimini, the
Riimini 's light will flash two times then long-time
on, it is in learning status.
To Next Page
Loading...
