2003484_A
For more information visit www.rimage.com/support
12
Operate Gemini Utilities
Operate Gemini Utilities
The Rimage Software Suite includes an application called Gemini
Utilities, which is used to change the display name of the Catalyst
system and to congure the beeper settings.
Tip: To access Gemini Utilities for the Catalyst 6000N, use the remote
desktop connection from a networked PC, or connect a monitor,
keyboard, and mouse to the Catalyst 6000N.
Note: Unless otherwise indicated, all Windows navigation statements
are Windows 7 paths. Other Windows operating system navigation
may differ slightly.
Start Gemini Utilities
1. Close all open software applications and stop all Rimage Services.
Note: Refer to your Rimage Software online help for additional
information.
2. From the Windows Start menu select: All Programs > Rimage >
Utilities > Gemini Utilities. Gemini Utilities opens.
Note: When the desired tasks are complete in Gemini Utilities,
remember to restart the Rimage Services.
Change the Autoloader Display Name
Use Gemini Utilities to enter the name displayed on the operator
panel.
1. Select the Override Name checkbox.
2. Clear the Use Computer Name checkbox.
3. In the Display Name eld, enter the new name.
4. Select Set Params to set the name.
5. Select Exit to close Gemini Utilities.
Enable the Beeper
You can change the number of beeps that occur when the system
requires user intervention, such as when out of media or in an error
state.
1. In the # of Beeps on Fault eld, select the number of beeps you
wish to hear when there is an error.
Tip: To disable the beeper, set the number to zero.
2. Select Set Params to set the number of beeps.
3. Select Exit to close Gemini Utilities.
To Previous Page
Loading...
