Rimage Catalyst 6000 - Safety, Compliance, and Disclaimers; Safety Precautions

3
Important Information
2003484_A
For more information visit www.rimage.com/support
Optical Disc Recording Software
Disclaimer
This Product, Software, or Documentation may be designed to assist
you in reproducing material in which you own the copyright or have
obtained permission to copy from the copyright owner. Unless you
own the copyright or have permission to copy from the copyright
owner, you may be violating copyright law and be subject to payment
of damages and other remedies. If you are uncertain about your
rights, you should contact your legal advisor. If you are neither in
possession of the copyright nor have authorization from the owner of
the copyright, unauthorized copying of copyrighted material on an
optical disc or any other media violates national and international
legislation and can result in severe penalties.
Safety and Compliance Information
This manual and the indications on the product allow proper and safe
operation. The indication marks below help protect you and other
persons from injury, and equipment from damage.
Safety Precautions
To ensure safety, read these precautions and familiarize yourself with
their meaning before using the equipment.
ȸ
Warnings!
• The laser beam used by the CD/DVD Recorder is a Class 1 laser. Do not
attempt to open the recorder. An authorized technician should perform all
service procedures.
• Use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiant exposure.
• Never use any optical instrument in conjunction with this unit. To do so will
greatly increase the hazard to your eyes.
ȸ
Cautions:
• For continued protection against risk of re, replace the fuse only with the
same type and rating. An authorized technician should perform all service
procedures.
• Use only the supplied AC power cord, or use a safety agency approved
power cord. For applications outside North America, refer to the nearest
Rimage ofce for assistance in selecting a locally approved power cord.
• This product is designed for an ofce environment.
• The Catalyst 6000N contains a lithium battery. There is a risk of explosion
if the battery is replaced by an incorrect battery. Dispose of the old battery
according to the manufacturer’s instructions included with the battery
packaging.