WARNING: Risk of electrical shock.
Disconnect power at the fuse or circuit
breaker before installing.
Verify that the supply voltage is correct. Connect
fixture to a 100 VAC~240 VAC 50/60 Hz power source.
Properly ground fixture.
Always follow code standards when installing wired
connections.
CAUTION: Risk of fire. Do not install near combustible
or flammable surfaces.
NOTICE: Do not connect this light fixture to a dimmer
switch or timer.
Floodlight Wired must be installed on a 4” round UL
listed weatherproof electrical box.
This manual is for informational purposes only.
Working with electricity can be dangerous unless
proper safety precautions are taken. If you are not
comfortable or are inexperienced with the processes
and tools described in this manual, we recommend
that you hire a licensed electrician.
For your safety...
32
To Next Page
Loading...
Need help?
General
