ring Floodlight Wired User Manual

Floodlight Wired must be installed on a 4” round UL listed
junction box. If you don’t have an existing junction box, you’ll
need to hire a licensed electrician to install one. Be sure to
comply with your local building codes.
Remove your existing floodlight.
With power o at the breaker, remove your
existing floodlight from the junction box it’s
attached to and disconnect the wires.
Remove the bracket.
If there is a metal bracket attached to your
junction box, remove that as well.
Inspect your junction box to make sure water
cannot get into it.
1110

ring Floodlight Wired Specifications

General

Power Source	Wired
Camera Resolution	1080p HD
Connectivity	Wi-Fi (802.11 b/g/n)
Color	White
Motion Detection Range	30 feet