Rinnai 8 Slim Four-Way Cassette OM
For a more detailed explanation of your air conditioner's advanced functionality, please refer to
the Remote Control Manual.
REMOTE CONTROL BATTERIES
Insert batteries before using the remote control� The battery type used is AAA (1�5 V)�
1� Remove the battery cover at the rear of the remote control�
2� Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly�
3� Reattach the battery cover�
If the LCD screen of the remote control starts to fade or fails to transmit, replace the batteries.
REMOTE CONTROL CRADLE
For convenience a slide-in cradle is provided for xing the remote control to a wall.
To Install:
Choose a safe and easily-accessible place. DO NOT mount the cradle in direct sunlight as this
may damage the controller.
Fix the cradle to the wall using the 2 screws provided.
CONTROLLER OPERATING BASICS
Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it�
The remote control may operate other electronic devices if pointed towards them. Make sure to
point the remote control towards the signal receiver of the air conditioner.
ONLY use a soft cloth to clean the signal transmitter LED and the receiver window.
ACHIEVING THE OPTIMAL PERFORMANCE
For optimal performance ensure to use the air conditioner within the following temperature ranges� Using the air
conditioner outside of these ranges, will activate certain safety protection features, that can eect the appliances
performance�
MODE COOL MODE HEAT MODE DRY MODE
Room Temperature 17°C ~ 32°C 0°C ~ 30°C 17°C ~ 32°C
Outdoor Temperature -15°C ~ 50°C -15°C ~ 24°C 0°C ~ 50°C
To further optimise the performance of your unit, do the following:
•
Keep doors and windows closed�
•
Limit energy usage by using TIMER ON and TIMER OFF functions�
•
Do not block air inlets or outlets�
•
Regularly inspect and clean air lters.
OPERATION - REMOTE CONTROL
To Next Page
Loading...
Need help?
General
