Model 2424WCwww.rinnaiamerica.com 6
This product must be installed by a Rinnai certified installer. Failure to
have the product installed by a Rinnai certified installer may result in a
voiding of the product’s warranty.
Detailed instructions on the proper installation practices to follow for
the installation of your new continuous hot water heater are included
at the back of this manual.
This appliance must be installed in accordance with local codes, or in
the absence of local codes, the National Fuel Gas Code, ANSI Z223.1
and/or the CAN/CGA-B149, Installation Codes.
Install this product outdoors,
DO NOT install indoors.
Do Not use this appliance if any part has been underwater. Immedi-
ately call a qualified service technician to inspect the appliance and to
replace any part of the control system and any gas control which has
been underwater.
For the Rinnai Certified Installer nearest
you call:
1-800-621-9419.
OWNER’S INSTALLATION INFORMATION
To Next Page
Loading...
Need help?
General
