J
Jose HamiltonAug 1, 2025
What to do if the air filter of my Rinnai EX17 Heater is blocked?
- JJordan GreenAug 1, 2025
If the air filter is blocked, clean the filter.
What to do if the air filter of my Rinnai EX17 Heater is blocked?
If the air filter is blocked, clean the filter.
What to do if the gas is turned off at the meter, tank, or valve of my Rinnai Heater?
If the gas is turned off at the meter, tank, or valve, turn the gas on.
What to do if my Rinnai Heater has a power failure?
If you experience a power failure with your Rinnai Heater, push the On/Off button to attempt a restart after the power is restored. If this is an initial installation issue, the cause may be air in the gas pipe, which an installer needs to purge.
What to do if the flue terminal of my Rinnai Heater is obstructed?
If the flue terminal is obstructed, clear the obstruction.
What to do if the louver of my Rinnai EX17 Heater is obstructed?
If the louver is obstructed, clear the obstruction.
Why is there no ON indicator on my Rinnai EX17?
If there is no ON indicator, make sure the heater is plugged in.
Explains safety alert symbols and hazard classifications like DANGER, WARNING, and CAUTION.
Details essential safety behaviors and practices for using the appliance safely.
Describes the appliance's built-in safety mechanisms, such as overheat protection and flame failure detection.
Covers programming, operating, and reviewing weekly timer schedules for automated comfort.
Lists error codes displayed by the unit and their recommended remedies for diagnosis.
Covers essential safety warnings, code compliance, and general installation requirements.
Details required flue terminal clearances, diagrams, and installation configurations.