Need help?Do you have a question about the Rinnai RHFE-308 FTR and is the answer not in the manual?
Ensures clean room air by exhausting flue products outside the building.
Program the appliance for two separate heating periods each day.
Automatically heats the room to the pre-set temperature before the programmed time.
Energy saving feature that reduces room temperature gradually over time.
Locks controls to prevent accidental operation by children.
Modulates fan speed based on room temperature for comfortable heating.
Avoid flammable materials near the heater and restrict airflow to prevent fires.
Do not misuse the appliance or place objects on it to ensure safe operation.
Keep flammable materials away from the flue terminal and heater louvres.
Ensure children are supervised and avoid contact with heater parts.
Press the ON/OFF button to start the heater and observe indicator lights.
Press the ON/OFF button; the fan continues cooling the appliance.
Adjust the temperature setting using the up/down buttons on the control panel.
Energy saving feature that reduces room temperature gradually over time.
Locks all controls except OFF to prevent accidental operation.
Modulates fan speed based on room temperature for comfortable heating.
Clean the filter weekly to prevent appliance strain and error codes.
Fill the tray daily during heating season to humidify air.
Adjust the warm air flow direction by bending the vertical louvres.
Overview of built-in safety devices protecting the appliance.
Clean fan filter weekly and wipe exterior with a damp cloth.
Check common problems before contacting service for ignition or operation.
Maintain recommended clearances from walls and flammable materials.
Details on available flue lengths and co-axial flue options.
Ensure flue terminal is clear of snow in heavy snowfall areas.
Specify the precise location for drilling the flue manifold hole.
Instructions for attaching wall mounting brackets to the unit.
Adjust sleeve length based on wall thickness and protrusion.
Secure the sleeve to the wall using provided screws.
Insert and seal the terminal, ensuring correct orientation.
Attach the manifold after the inner connection assembly is fixed.
Connect the air inlet hose to the flue manifold.
Connect the exhaust pipe elbow and secure with a locking clamp.
Connect air lines between the heater and the flue pipe.
Connect rigid flue pipes using pipe stoppers and telescoping.
Join air intake hoses together using a hose joint socket.
Observe maximum flue length and bend limitations for optimal performance.
Ensure proper slope to prevent condensed water accumulation and blockages.
Connect to gas supply using a union service cock and check for leaks.
Ensure proper earthing and use appropriate wiring regulations.
Check gas connections, pressure, and ignition sequence.
Complete the wall fitting by securing the top spacer.
Explain operation and basic fault finding to the customer.
To Next Page
General