EasyManua.ls Logo

Rinnai RHFE-308FTR User Manual

Rinnai RHFE-308FTR
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Energysaver Co-axial Flue System
Installation Manual
For Models:
RHFE-308FTR
RHFE-309FT / FT2
RHFE-556FTR / FDT
RHFE-557FTR
RHFE-559FT / FDT / FT2 / FDT2
RHFE-561FT / FT2
RHFE-1004FT / FDT
RHFE-1005FT / FDT / FT2 / FDT2
USE ONLY RINNAI GENUINE PARTS

Other manuals for Rinnai RHFE-308FTR

Question and Answer IconNeed help?

Do you have a question about the Rinnai RHFE-308FTR and is the answer not in the manual?

Rinnai RHFE-308FTR Specifications

General IconGeneral
BrandRinnai
ModelRHFE-308FTR
CategoryHeater
LanguageEnglish

Summary

WARNINGS & IMPORTANT INFORMATION

BEFORE USING INSTALLING FLUE COMPONENTS

Essential precautions and guidelines to follow before starting flue system installation.

REGULATORY INFORMATION

Details on certifications, standards compliance, and legal requirements for flue installation.

Notice to Victorian Consumers

Specific installation advice and requirements for consumers located in Victoria.

GRAPHICAL CONVENTIONS USED IN THIS MANUAL

Explanation of symbols and icons employed in the manual to clarify installation procedures.

REGULATIONS & CLEARANCES

Mandatory safety clearances and regulatory requirements for installing the flue system.

FLUE TRANSITION CONNECTIONS

LOCATION

Guidance on selecting appropriate and safe locations for appliance and flue terminal placement.

LUBRICATING COMPONENTS

Instructions on the correct application of silicone grease for O-ring seals on flue components.

WALL PENETRATIONS

INSTALLATION CONFIGURATIONS

FLUE KIT COMPONENTS

INSTALLATION METHODS

DIRECT FLUE INSTALLATION METHOD

Comprehensive guide for performing a direct flue installation.

DIRECT EXTENDED FLUE INSTALLATION METHOD

Method for extending the direct flue for installations involving thicker walls.

EXTERNAL WALL FLUE INSTALLATION METHOD

Procedure for executing an external wall flue installation.

SIDEWAYS FLUE INSTALLATION METHOD

Steps for correctly installing the flue system in a sideways configuration.

UNDER FLOOR FLUE INSTALLATION METHOD

Detailed instructions for conducting an under-floor flue installation.

CUTTING ~ ESDFK, ESPIPE900 & ESROOFCOWL

COMPONENT ASSEMBLY & CONNECTION WALL TERMINAL ~ ESDFK & ESWTERM

COMPONENT ASSEMBLY & CONNECTION ~ ESBEND

Guide to assembling and connecting ESBEND flue components.

COMPONENT ASSEMBLY & CONNECTION ~ ESCONDK

Procedure for the assembly and connection of the ESCONDK condensate trap.

COMPONENT ASSEMBLY & CONNECTION ~ ESROOFCOWL

Instructions for assembling and connecting the ESROOFCOWL roof terminal.

COMPONENT ASSEMBLY & CONNECTION "ON-WALL" TERMINAL ~ ESWTKIT2

COMPONENT ASSEMBLY & CONNECTION "IN-WALL" FLUE ~ ESFKIT03 & ESKITIW

CONNECTING COMBUSTION AIR HOSE (AIR SUPPLY)

CONNECTING HEATER EXHAUST

CONNECTING CONDENSATE DRAIN TUBE TO HEATER

Related product manuals