Rinnai S20 User Manual

Rinnai 25 Split Solar OIM
Gas Booster Mounting
Step 1� Mount upper mounting bracket*
using template provided�
(SG175 & SG215 are factory mounted)�
Step 2� Fix lower mounting bracket* to
Booster using screws provided�
Step 3� Hang booster on bracket and secure with
screws provided�
Step 4� Secure lower mounting bracket to cylinder
using screws provided�
* Depending on the version of the installation kit, either one or both of the brackets may have the tabs bent out�
If both of the tabs are bent out, follow instructions as shown above. If only one bracket has tabs bent out, t it to
the upper tank�
If the gas booster is not mounted on the storage cylinder, ensure that the wall or structure on which it is to be
mounted is capable of supporting the weight of the appliance and associated pipe work� Refer to the table on page
17 for individual gas booster weights. For gas boosters installed on elevated structures or under oors specic
requirements apply, refer to AS/NZS 5601 for details. Location of gas booster ue terminal must be in accordance
with AS/NZS 5601� Refer page 24�
INSTALLATION

Rinnai S20 Specifications

General

Brand	Rinnai
Model	S20
Category	Water System
Language	English