Operation / Installation
Manual
RINNAI ‘PRESTIGE’
®
and
RINNAI ‘SUNMASTER’
®
Solar Split Systems
NOTE
WARNING
All Rinnai gas products
are A.G.A. certified.
Distributed and serviced in Australia under a Quality
System certified as complying with ISO 9001 by
SAI Global
AS 2712
Lic No.1849
SAI Global
W169
SAI Global
The appliance must be installed, commissioned and serviced by an
authorised person in accordance with all applicable local rules and
regulations.
The collector flow and return pipes should be 15mm copper tube or
alternative tube supplied by Rinnai.
Plastic pipe must not be used. Plastic pipe is not suited to the high
water temperatures and pressures that may occur in the collector
flow and return system.
NOT SUITABLE AS A POOL OR SPA HEATER
15401021
To Next Page
Need help?
General
