Rinnai V75i series User Manual

10 Value Series Manual
Unit clearances
* 0 inches from vent components and condensate
drain line.
The clearance for servicing is 24 inches in front of the
water heater.
For closet installaon, clearance is 6 inches (152 mm)
from the front.
Indoor models: V75i, V65i
Outdoor models: V75e, V65e
The clearance for servicing is 24 inches in front of the
water heater.
to Combusbles
inches (mm)
to Non-
Combusbles
inches (mm)
Top of Heater 12 (305) 2 (51)
Back of Heater 0 (zero) 0 (zero)
Front (Panel) 24 (610) 0 (zero)
Front (Exhaust) 24 (610) 24 (610)
Sides of Heater 6 (152) 1/8 (3.2)
Ground/Boom 12 (305) 2 (51)
to Combusbles
inches (mm)
to Non-
Combusbles
inches (mm)
Top of Heater 6 * (152) 2 *(51)
Back of Heater 0 (zero) 0 (zero)
Front of Heater 6 (152) 6 (152)
Sides of Heater 2 (51) 1/2 (13)
Ground/Boom 12 (305) 12 (305)
Vent 0 (zero) 0 (zero)

Rinnai V75i series Specifications

General

Type	Tankless Water Heater
Fuel Type	Natural Gas or Propane
Maximum BTU	180, 000 BTU
Flow Rate	7.5 GPM
Energy Factor	0.82
Installation	Indoor
Gas Connection	3/4" NPT
Water Connection	3/4" NPT
BTU Input Range	15, 000 - 180, 000 BTU
Temperature Range	98°F to 140°F
Electrical Requirements	120V AC, 60Hz
Ignition Type	Electronic
Warranty	5-year on parts, 1-year on labor