Rinstrum R300 Series - Showing Totals

Rinstrum - R300 Series Digital Indicator Operator Manual Rev 1.5
Page 16
5.7. Showing Totals
• The <PRINT> key is used not only to print the
current weight but also to add that weight to the
current total.
• When the <TOTAL> key is pressed, the indicator
displays COUNT followed by the number of items
in the total.
• After this the indicator displays TOTAL followed by the
current total weight.
• If the total weight is too large to display in six digits, the
weight is shown in two sections labelled with the upper six
digits displayed before the lower six digits.
• Press and hold the <PRINT> key to cause the
total accumulated weight to be printed and then
cleared.