Rio Mobility Firefly - Firefly Customization

Firey
TM
User Manual
www.riomobility.com18
Customization
10. Firey
TM
Customization
Rio Mobility can oer special adaptations tailored to each user. Some are described below. If you
have additional requests, please discuss with your heath care professional and contact customer
service at sales@riomobility.com.
Speed Limiter
The Firey
TM
is shipped with a speed limiter inside the Controller, which limits the top speed of the
Hub Motor to 6mph (10kph). Once you are experienced with driving the Firey
TM
, and wish to travel
faster, you may remove the limiter at your own risk. Consult with your health care professional
before making this change.
The Controller is attached to the Controller Plate with velcro. Carefully pull it out.
Among the wires you will see a white wire with a black plastic connector, shown
below.
Disconnect this connecter. This disables the speed limiter and allows for a top
speed of 10mph (16kph).
Place the wires back into the box and replace the Controller, pressing rmly to
ensure secure attachment to the velcro.
Use extra caution as you become accustomed to the new performance abilities of your handcycle,
especially when traveling around turns.
Visit riomobility.com for more customization ideas.
1.
2.
3.