Rio Mobility Firefly - Installing Your Firefly; Installation Overview; Charge the Battery

Firey
TM
User Manual
www.riomobility.com6
Installing Your Firey
4. Firey
TM
Specications
Gearbox
24V, 220W geared brushless hub motor
Battery
24V 10Ah Lithium Polymer battery, 5lbs (2.2kg)
Construction
All alloy steel construction for strength and reliability
Brakes
Dual Promax lockable V-brakes
Color
Silver metallic
Weight
Total weight is 33lb (15kg) with battery
Tire
16” x 1½” (40 x 305) KendaQuest all-tread tire
5. Installing Your Firey
TM
Notes on Installation
Since the Firey
TM
is a highly customizable product, it is recommended that initial installation be
performed by two people. Once it is congured for your wheelchair, no additional assistance is
usually necessary.
If you are not comfortable adjusting your wheelchair, or with tasks such as assembly, tightening
nuts and bolts, or gripping a wrench, it is recommended that a qualied technician perform the
initial installation. A wheelchair or bicycle mechanic is suggested.
There are ve installation steps:
Charge the Battery
Install the Clamps
Prepare the Firey
TM
Position the Wheel and Handlebar
Adjust the Upper and Lower Arms
Install the Battery
Familiarize yourself with the component names in the previous section. During the installation
you will need to locate and/or identify these components.
Contact customer service at sales@riomobility.com if you have any dicult installing your Firey
TM
.
Charge the Battery
The Battery may not arrive to you fully charged. Plug in the Charger and charge during the rest of
this installation process, or until fully charged (up to ve hours).
▫
▫
▫
▫
▫
▫