Ripack 3000 Series - SECURIPACK Functionality; SPARE PARTS

- 12 -
The SECURIPACK automatically cuts off the
supply of gas if the pressure drops below the
minimum level necessary for the normal
efficiency of the work.
This is the case when :
• The bottle is nearly empty (the gun can
only be used for a few more minutes at
reduced power: change the bottle);
• The temperature of the bottle has dropped after intensive use (icing): if this
is the case, change the bottle temporarily or wait until the normal pressure
returns, especially if you are working outside (0°C / 30°F and colder ).
NEVER HEAT A GAS BOTTLE WITH A
FLAME.
WHEN YOU HAVE FINISHED WORKING,
ALWAYS CLOSE THE GAS BOTTLE
VALVE AND EMPTY THE HOSE BY
PRESSING THE TRIGGER.
SPARE PARTS
THE COMPANY RIPACK SHALL NOT
BE HELD LIABLE IN THE EVENT THAT
THE GUN IS DISMANTLED.
Contact your dealer if the RIPACK
S ERIES 3000 needs to be dismantled.
Only the procedures described in the
maintenance chapter are authorized .