- 18 -
Cleaning:
Frequency :
• Non-polluted environment: Every 500 hours.
• Polluted environment: As soon as it is noticed that there is a reduction in
power.
C
LEANING
THE
NOZZLE
GRILLE
:
• Place the nozzle for a few minutes in a dry petrol bath (e.g. F petrol) to make
sure the various tightness systems are not damaged. Grease products (e.g.
oil) are not recommended because they attract impurities afterwards.
N
EVER
USE
ANY
OTHER
DEGREASING
PRODUCTS
FOR
CLE ANING
.
• Clean the inside and the outside of the nozzle grille with a paintbrush or a hard
brush.
• Clean the receiving tube of the spark plug.
• Rinse it again and apply compressed air (block the hole on the grille side
intermittently for intensive blowing of the inside of the receiving tube).
• Put the spark plug back into position and check that
it is pressed far enough. (clip up to the end).
Incorrect positioning may cause the electric contact
of the spark plug to deteriorate.
To Next Page
Loading...
