- 22 -
P
ROBLEMS
C
AUSE
R
EMEDIES
The
combustion
nozzle has
insufficient
power
The gas you are using is
not propane
.
Use propane gas.
The bottle capacity is too
low
.
Use
a bottle with a larger
capacity.
The ambient
temperature is
low and the
appliance is
being used
intensively
.
Alternate between several
bottles
.
The injector is blocked
.
Clean the jet (see "Cleaning
").
The rubber hose is twisted
Put it back in its initial position
.
•
Flame is
lower.
•
Internal
combustion.
•
Combustion
nozzle gets
hot
.
The nozzle grille is
blocked by particles
suspended in the air
(working in polluted
environment
).
Clean the grille and the venturi
of the R
IPACK
3000-70 (see
"Cleaning
").
The
combustion
nozzle does not
go out
immediately
.
Open the trigger and lubricate
the piston. If the nozzle does not
extinguish despite lubrication,
take your appliance to your
RIPACK dealer for inspection .
The trigger valve is jammed
or blocked.
To Next Page
Loading...
