To Next PageTo Next Page
Need help?Do you have a question about the Ripmax Mini Xcalibur E Jet and is the answer not in the manual?
Lists the technical specifications of the model.
Provides crucial safety guidelines for operating the model.
Outlines essential checks before operating the model.
Details safe practices and restrictions for model operation.
Lists the necessary components and tools for building the model.
Attaching hinges, servos, and pushrods to the ailerons and wing panels.
Installing the aileron servo hatch and pushrod linkages.
Fitting servos and pushrods for the elevator and rudder.
Assembling the rudder linkage and attaching horns to the flaps.
Installing flap servo, wing spar, and securing wings and tailplane.
Details the technical specifications for the electric retracts.
Assembling the nose retract unit, wheel, and steering mechanism.
Installing main undercarriage, receiver, power switch, and tidying leads.
Installing the EDF unit, speed controller, and rear tail pipe.
Mounting the battery tray and positioning the LiPo batteries.
Recommended throws and exponential for ailerons and elevators.
Recommended throws and exponential for rudder and flaps.
Details the procedure for measuring the model's center of gravity.
Advice for initial flights, runway needs, and takeoff.
A comprehensive list of checks to perform before each flight.
General| Material | EPO Foam |
|---|---|
| Type | Electric Ducted Fan Jet |
| Battery | 11.1V |
| Charger | Not included |
| Transmitter | Not included |
| Receiver | Not included |
