Risco LightSYS2 Quick User Guide

4 LightSYS2 Quick User Guide
Output Control A/B/C
for 2 seconds
for 2 seconds
> [Code]
Panic Alarm simultaneously for 2 seconds
Clear Operation
Notes:
*For Part setting with no entry delay, press and hold for two seconds
1. Consult your installer for the operations defined with a code.
2. The proximity tag can be used instead of code.
3. For Part Setting (Stay Arming) with no entry delay press for 2 seconds.
4. Light sensor is used to save battery by turning on/off the keypad backlight.
5. Needs to be defined by your installer.
Smartphone
Full Arm – System
Full Arm – Partition
>
Full Arm
–
Group
(if supported)
>
Partial Arm – System
Partial Arm – Partition
>
System Disarm > [Code]
Partition Disarm >
Detector Bypass
(On/Off toggle)
> >
Web Application
ARM/DISARM
Full Arm All Partitions or PARTITION
x
> Full Set
Full Arm – Group
(if suppored)
[Group Letter] > Full Set
Or PARTITION
x
> [Group Letter]
Part Arm All Partitions or PARTITION x > Partial Set
Disarm All Partitions or PARTITION x > [Code] > UNSET

Risco LightSYS2 Specifications

General

Brand	Risco
Model	LightSYS2
Category	Security System
Language	English