To Next PageTo Next Page
Need help?Do you have a question about the Risco Agility3 and is the answer not in the manual?
General| Partitions | 3 |
|---|---|
| Remote Management | Yes |
| Voice Module | Optional |
| Two-Way Voice | Yes |
| Siren Output | Yes |
| Event Reporting | Yes |
| Remote Control | Yes |
| Bypass | Yes |
| Tamper Protection | Yes |
| Remote Access | Yes |
| Zones | 32 |
| Communication | GSM/GPRS, IP |
| Mobile App | Yes |
| Verification | Audio, Video |
| Power Source | Main power with battery backup |
| Compatibility | Risco Cloud |
Press the A button for quick arming.
Press + code or proximity tag for high security arming.
Press the keyfob button to arm the system.
Arm the system via the web application by clicking Full Arm.
Send an SMS with [Code][A] to arm the system.
Arm the system using the smartphone application.
Press the A button for quick stay arming.
Press + code for high security stay arming.
Press keyfob button or button 4 for stay arming.
Arm the system via the web application by clicking Part Arm.
Send an SMS with [Code][H] to perform stay arming.
Arm the system using the smartphone application for stay mode.
Press partition numbers for quick arming.
Press partition numbers + code or tag for high security arming.
Send SMS with [Code][A/H][Partition] for partition arming.
Hold the button for two seconds to view the last alarm.
Short/long press on the key for LCD display of system status.
Press the disarm button followed by code or proximity tag.
Press the disarm button followed by code.
Press the disarm button to disarm the system.
Disarm the system via the web application.
Send an SMS with [Code][D] to disarm the system.
Disarm the system using the smartphone application.
Press partition numbers for quick disarming.
Press partition numbers + code for high security disarming.
Press the button to disarm all assigned partitions.
Send SMS with [Code][D][Partition] for partition disarming.
Press the disarm button followed by duress code.
Bypass zones using code and zone number.
Press both C and keys simultaneously for panic alarm.
Press buttons 4 and 5 simultaneously for 2 seconds for fire alarm.
Press buttons 7 and 8 simultaneously for 2 seconds for emergency alarm.
Configure Follow-Me settings using code and parameters.
Press the button for 2 seconds to toggle system chime.
Press buttons 1, 2, 3 for 2 seconds to control outputs.
Indicates power status: OK, AC trouble, or low battery.
Indicates system trouble status.
Indicates system armed, alarm, or exit delay status.
Indicates system armed at stay mode.
Indicates system readiness for arming.
Details sound patterns for intrusion, fire, delays, and operations.
Procedure to add, change, or assign user codes.
Procedure to assign proximity tags to user indices.
SMS commands for Full Arm, Home Arm, Partition Arm.
SMS commands for Full Disarm, Partition Disarm.
SMS commands for Bypass and Un-bypass Zones.
SMS commands to get system status, alarm memory, and credit level.
SMS commands to activate/deactivate outputs.
Instructions for interacting with the system via phone calls.
Menu options for acknowledging events and accessing operations.
Steps to register your Agility 3 system to the RISCO Cloud service.
Instructions for logging into the RISCO Cloud portal.
Information on using the iRISCO smartphone app for system control.
