Need help?Do you have a question about the Risco Agility 4 and is the answer not in the manual?
General| Battery Backup | Yes |
|---|---|
| Siren Output | Yes |
| Event Reporting | Yes |
| Remote Control | Yes |
| Weight | 1.2 kg |
| Type | Wireless |
| Communication | GSM |
| Keypad Type | Wireless |
| Mobile App Support | Yes |
| Operating Temperature | -10°C to 55°C |
Explains the VUpoint video verification solution for enhanced security.
Describes the PIR camera functionality to capture and send snapshots of events.
Lists key features of the Agility 4 system, including wireless communication and partitions.
Details using the iRISCO Smartphone app for system control and monitoring.
Explains the functionality of the 4-button wireless keyfob for arming and alarms.
Describes the Panda keyfob for arming, unsetting, and status checks.
Covers operations using the 8-button remote control for setting and activating outputs.
Explains programming and operating the system via wireless keypads.
Describes remote operations using a touch-tone phone.
Provides critical warnings regarding product usage, repair, and child safety.
Details the status indications provided by the main panel's LED lights.
Explains the different sound alerts from the main panel for system events.
Details LED status indications for the LCD keypad.
Explains LED status indications for the Panda keypad.
Describes LED states for remote control operations.
Details buzzer sounds for confirmation, error, and alarm from remote controls.
Explains how to view the last alarm event using different devices.
Details procedures to check system status via display and voice announcements.
Describes the different types of voice messages the system can provide.
Explains how the system sends SMS event notifications.
Describes system status and event notifications sent via email.
Instructions for setting the alarm system before leaving the premises.
Details the procedure for fully arming the system when the premises are vacated.
Explains how to partially arm the system, allowing occupants to stay.
Describes managing partitions for setting or unsetting parts of the system.
How to set the system even if some zones are open or faulty.
Allows setting the system despite existing system faults.
Enables setting a partition with open zones by omitting them.
Procedures for disarming the entire security system.
How to unset the system and silence an active alarm.
Instructions for disarming individual partitions of the system.
How the Grand Master assigns permissions for duress unset feature.
Procedure for the Grand Master to assign duress unset codes to users.
Procedures for resetting the system after an alarm, requiring installer intervention.
User procedure to reset the system using a provided anti-code.
How to send a panic notification to the monitoring station or destinations.
Procedure to send a fire alarm from the keypad.
How to send a medical or emergency alarm from the keypad.
Controls automated external devices like lights and appliances remotely.
Instructions for viewing the system's event log via keypad, web app, or smartphone app.
Enables 1-way or 2-way voice communication with the monitoring station or premises.
How users can activate or deactivate the Talk & Listen feature.
Explains the primary functions of common buttons on the LCD/Panda keypads.
How to adjust the display contrast on the keypads.
Toggles chime notification for zone violations when the system is unset.
Simple operation to activate the keypad.
Controls the main buzzer for system status notifications.
How to adjust the speaker volume on the keypads.
How to adjust the keypad volume and display contrast.
Procedure to change the language settings for the keypad and panel.
Instructions for setting the system's internal clock and date.
How to activate/deactivate service mode for battery replacement to silence tamper alarms.
How to check the credit level of a prepaid SIM card via SMS or voice.
Procedure to reset the SIM card after replenishing credit.
Configuration of beeps for entry and exit delay modes.
How to view installer's name and phone number.
User confirmation required to reset system after an alarm.
Manual procedure for users to restore system faults to normal.
Grants permission for installer/monitoring station communication via IP or GPRS.
Grants permission for remote configuration and operation via Configuration Software.
Ensures correct detector operation by testing zones after setting.
Procedure to change the 4-digit code for high-security remote control operations.
How to cancel a command before it is executed from a remote control.
Instructions for remotely accessing and operating the system via a touch-tone phone.
How users receive pre-recorded event notifications via phone calls.
User actions to acknowledge event messages and proceed.
Lists available remote operations via telephone menus.
Details using the 2-way voice communication feature.
Explains system replies to SMS commands.
Lists SMS commands for system operations like setting, unsetting, and status checks.
Step-by-step guide for registering the system to the RISCO Cloud.
Steps to log in to the RISCO Cloud and access the web user application.
How to download the iRISCO app for iOS and Android devices.
Lists key actions performable via the iRISCO Smartphone app.
Explains user code types (Installer, Grand Master, System Users) and their properties.
Procedure to assign or modify user codes via the LCD/Panda keypad.
How to edit user details like name, partition access, and authority levels.
Instructions for removing user codes from the system when it's unset.
Procedure to assign a proximity tag to a specific user.
Methods for removing proximity tags from the system.
Setting up phone numbers, emails, or smartphones for event notifications.
How to test if Follow Me destinations are receiving event notifications correctly.
Explains the Scheduler feature for automatic system setting and utility output control.
Procedure to activate or deactivate scheduled programs using the keypad.
Details electrical specifications like voltage, current consumption, and battery.
Provides physical dimensions and weight of the system.
Lists RF immunity, power output, and frequencies used by the system.
Outlines the terms and period of the product's limited warranty.
Procedure for returning defective products for repair or replacement.
Details conditions that void the warranty and exclusions.
RISCO disclaims liability for personal injury or property loss from system failure.
Statement of compliance with essential requirements of Directive 2014/53/EU.
Provides contact details (phone, email) for RISCO Group support by region.
To Next Page
