Need help?Do you have a question about the Risco WisDom and is the answer not in the manual?
General| Type | Wireless Security System |
|---|---|
| Battery Backup | Yes, rechargeable battery |
| Communication | GSM/GPRS |
| Remote Control | Yes, via smartphone app |
| Event Reporting | SMS |
| Supported Protocols | RISCO Wireless Protocol |
| Operating Temperature | -10°C to 55°C |
Declares compliance with essential requirements of Directive 1999/5/EC for the control panel.
Lists the main features and maximum capabilities of the WisDom system.
Illustrates the system components and how they connect to the WisDom control panel.
Describes various methods for operating the WisDom system locally or remotely.
Explains the different types of spoken messages used by the WisDom system.
Details the function and meaning of the six LED indicators on the WisDom panel.
Explains the purpose and operation of the various keys on the WisDom keypad.
Describes a shortcut method for easily operating the system and activating functions.
Explains how the LCD display shows system and partition status.
Describes the display that appears when the keypad is disabled after inactivity.
Explains how to set the system, including checking the Ready LED and using user codes.
Details the procedure for arming all system detectors when leaving the premises.
Describes how to arm perimeter detectors only, allowing movement inside the premises.
Explains how to divide the system into up to three partitions and set them individually.
Covers the process of deactivating the system's detectors to prevent alarms.
Details how to deactivate all partitions assigned to a user code.
Explains how to unset individual partitions within a set system.
Describes using a special duress code to unset the system and send a silent alarm.
Explains how to silence an alarm and return the system to an unset state.
Details the procedures for resetting the system after an alarm condition, including Anti Code and Engineer Reset.
Guides users on how to connect to the WisDom system using a remote telephone.
Lists the available remote operations and their corresponding quick key combinations.
Explains how to listen in and talk to the premises remotely via the WisDom system.
Describes collecting and leaving voice messages for other system users.
Explains how the system informs users of security situations via phone calls.
Lists options for acknowledging events and interacting with the system after an event announcement.
Explains how to set up, modify, or delete user codes for system access.
Details the procedure for removing existing user codes from the system.
Describes how to set the correct time and date for proper system operation.
Explains how to configure phone numbers for event notifications and remote operations.
Describes how to record command sequences and assign them to function keys for automated operations.
Allows activation or deactivation of system intrusion zones and restoration of omitted zones.
Covers programmable outputs, follow-me numbers, and ARC control functions.
Provides options to view system faults, alarm memory, partition status, and zone status.
Details system testing, walk tests, chime control, buzzer control, and keypad sound settings.
To Next Page
