WisDom User Manual
45
Defining a User Unsetting Limitation Program
A user limitation program automatically prevents certain users from
unsetting the system during specified time intervals. By default, all
users of the system operate without this limitation. When defining a
user limitation program, you need to define the following three
parameters: Users, Time Schedule, and Label.
NOTE:
By default, all users are not restricted.
¾ To define a user limitation program:
1)
Repeat stages 1- 4 of the Setting/Unsetting
schedule programming procedure.
2)
Select [3] User Limit
3)
Follow the LCD display messages that will guide you
through the programming procedure
Enabling and Disabling Local
Announcement Messages
Upon event occurrence, the WisDom can announce the security
situation to occupants of the premises by sounding a local
Announcement message. This Announcement message can be
enabled or disabled, per event.
By default, all Announcement messages are enabled.
¾ To enable and disable Announcement messages:
1)
Press [*][7] from the main user menu to enter the Voice
Message menu.
2)
Enter your user code followed by
3)
From the Voice Msg. menu, select [4] Announce
Message.
4)
The Announce Message menu lists system events.
To Next Page
Loading...
