34 WisDom User Manual
¾ To listen and talk:
1)
From the Operations/Acknowledge menu, press [6]. The
following messages are announced:
“To Listen In press 1, To Talk press 2, To return to the
previous menu, Press star ”
NOTE:
The bell alarm resumes sounding 2 minutes after the last key has been
pressed, and the previous menu is announced.
2)
To listen In: [6][1]
At any time, you can press [1] to listen in to the premises.
The bell alarm is silenced. If you talk, your voice cannot be
heard in the premises.
3)
To Talk: [6][2]
At any time, you can press [2] and talk into the telephone.
The bell alarm is silenced, and your voice is heard in the
premises. During Talking mode you can’t hear sounds from
the premises.
NOTE:
At the premises, when you switch from Talk mode to Listen mode, the
WisDom’s speaker sounds a beep. During Talking mode the Message LED
is off. During Listen In mode the Message LED flashes rapidly.
4)
To stop 2 way communication:
Press [*] to stop listening and talking and return to the
Operations menu.
Family Message Center
The WisDom enables you to collect voice message from and leave
voice message for other users of the system.
¾ To Remotely Play a Message:
From the Operations menu, press [7]. One of the following
messages is announced:
“You have a new message” or “You have no new
message”. Press [1] to play the new message.
To Next Page
Loading...
