Risco WisDom - Chapter 6: Main User Settings; Defining System Time and Date

40 WisDom User Manual
Chapter 6: Main User Settings
The WisDom comes with a variety of selectable user functions that
become available when you enter the User Functions mode. The
following chapter lists the main functions.
NOTE:
Although these functions are in the user functions menu, you can ask your
engineer to perform the programming of these functions for you.
Defining System Time and Date
(Grand Master or Manager only)
The correct time and date must be set to ensure proper operation of the
Wisdom. The date and time are defined and changes from the Clocks
option in the User Functions menu.
¾ To set/change the system time:
1)
From the User Functions menu, select [6] Clocks.
2)
Enter the Grand Master or Manager code followed by
3)
Select [1] System Time.
4)
Enter the correct time in 24-hour format. Use the
and
keys to move the cursor and the numerical
keys to set the time.
5)
Press
to confirm.
¾ To set/change the system date:
1)
From the User Functions menu, select [6] Clocks.
2)
Enter the Grand Master or Manager code followed by
3)
Select [2] System Date.