WisDom User Manual
39
5)
Enter the two-digit User Index number to which you want
to assign a user code. For example, to assign a user
code to user index number 6, press
.
NOTE:
In the WisDom system, the User Index number is from 00 to 32.
The User Index number 00 belongs to the Grand Master user code.
6)
Enter the new code and press
.
7)
If successful, a single confirmation beep is sounded, and
a message is displayed. If not, three quick error beeps
are sounded.
8)
Repeat the above steps for additional codes until
complete.
9)
When all codes are entered press
quickly to
reset and exit the User Functions menu.
Deleting User Codes
At times, it may be desirable to completely delete a user code. Note
that it is impossible to delete the Master Code (although it can be
changed).
The system must be unset in order to delete user codes.
¾ To delete a user code:
1)
Follow steps 1-5 in the previous procedure.
2)
When requested to enter new code press
followed by .
3)
If successful, a single confirmation beep is sounded,
and a message is displayed. If not, three quick error
beeps are sounded.
4)
Repeat the above steps for additional codes until
complete.
5)
When all required codes are deleted, press
quickly to reset and exit the User Functions menu.
To Next Page
Loading...
