50 WisDom User Manual
Chapter 7: Complete Menu of User
Functions
Functions Your WisDom comes with a variety of selectable user
functions that become available when you enter the User Functions
mode. This chapter lists the complete menu of user functions.
To enter the User Functions mode, press
followed by the
function Index or quick key (see the table below) and your user code.
For example, to omit a zone, press
[1][1][1-2-3-4] .
To exit the User Functions mode and return to Normal Operation
mode, press
quickly.
Quick
Key
Function Description
1 Omit Zone
1 De/activate Provides the ability to activate or deactivate any of the
system's intrusion zones.
Use the
key to toggle between [Y]/[[N] for the
zone status and then press
to confirm
2 Omit Reset Restores any omitted zones.
3 Omit Recall Recalls the most recent omitted zone.
4 Omit
Tamper
This option provides the ability to omit the WisDom
panel box or bell tamper.
If omit tamper is selected and a tamper condition
occurs, there will be no alarm, no indication to the
MS and no record in the event log.
2 Activities
1 Programm
able
Output
(PO)
Allows user control of previously designated external
devices (e.g. an appliance, a motor-driven garage door,
etc.)
To Next Page
Loading...
