44 WisDom User Manual
NOTES:
1. When defining the time intervals for each day of the week you can select
[8] All to set the same time intervals for every day in the week.
2. Use key to enter [Y] when requested. For example when defining
a partition that will be automatically set and unset
3. Leave the time at 00:00 if you do not want to perform the automation
during the current interval for the current day
Defining a PO Activation Program
A PO (programmable output – home appliance) activation program
automatically activates and deactivates POs during your required
intervals. In each program, you can define four POs to operate
simultaneously.
When defining a PO activation program, you need to define the
following parameters: POs, Time Schedule, Holiday, and Label.
¾ To define a PO activation program:
1)
Repeat stages 1- 4 of the Setting/Unsetting schedule
programming procedure.
2)
Select [2] PO On/Off
3)
Follow the LCD display messages that will guide you
through the programming procedure
NOTES:
The [3] Holiday option for the PO scheduling program defines the way in which
the group of POs are activated during a holiday period.
N: During holidays, POs are activated in the same way as defined in the time
windows of the week.
Y: POs are activated during the holiday according to the time schedule defined
in the next step (holiday definition).
To Next Page
Loading...
