Risco WisDom - Defining Follow-Me Numbers

WisDom User Manual
41
4)
Enter the correct date. Use the
and keys to
move the cursor and the
key to toggle among the
choices.
5)
Press
to confirm.
Defining Follow-Me Numbers
In the case of an alarm or event, the system can initiate a phone call to
a designated telephone, send SMS or send an Email and employ
unique tones or messages to express the active event.
Your engineer defines the type of reporting to a follow me destination.
Consult your engineer for the possibility to report events by SMS or
Email.
¾ To enter/edit a Follow-Me phone number:
1)
From the User Functions menu, select [2] Activities.
2)
Select [2] Follow Me.
3)
Select [1] Define
4)
Enter your user code followed by
5)
Select the Follow Me index number you want to edit.
6)
Enter the phone number, including the area code (if
required) or an E-mail address (depending on how
Follow Me is defined) and press
.
7)
After entering the phone number, two questions
may be displayed (depending on Follow Me type).
These questions enable you to define the
permission for remote operations assigned to the
designated phone.
8)
ENABLE FM NO 1:
REMOTE PROGRAM:N
ENABLE FM NO 1:
REMOTE PROGRAM:N
Select one of the following options
to define the permission:
Y: The user on the FM phone can
enter the Remote Operations
menu and perform all available
options.