To Next PageTo Next Page
Need help?Do you have a question about the Risco WiComm Pro and is the answer not in the manual?
General| Category | Security System |
|---|---|
| Manufacturer | Risco |
| Communication Technology | Wireless |
| Communication Protocol | Proprietary |
| Frequency | 868 MHz |
| Remote Control | Yes |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C |
| Communication | GSM/GPRS/IP |
| Encryption | Advanced Encryption Standard (AES) |
| Number of Zones | 32 |
| Siren | Built-in and external |
| Alarm Transmission | GSM/GPRS/IP |
| Programming | Via software |
| Backup Battery | Yes |
| Battery Life | Up to 24 hours |
| Compatibility | Risco Cloud |
Arm the system in Quick mode using a keypress or proximity tag.
Arm the system in High Security mode using code or proximity tag.
Arm the system using Web, Smartphone app, or SMS.
Arm the system in Part Set Quick mode via keypress or tag.
Arm the system in Part Set High Security mode via code or tag.
Arm the system in Part Set using remote methods.
Set partitions (1-3) using Quick mode via keypress or remote.
Set partitions (1-3) using High Security mode via code or remote.
Set partitions via Smartphone app or SMS.
Omit zones using the keypad menu and saving the selection.
Omit zones using SMS commands with zone numbers.
Unset the system using code or proximity tag on the keypad.
Unset the system via Web, Smartphone app, or SMS.
Unset partitions (1-3) via code or proximity tag on the keypad.
Unset partitions (1-3) using Quick mode on the keypad.
Unset partitions via Smartphone app or SMS.
Check system status on the LCD display via keypad.
Retrieve the last alarm event from the Event log via SMS.
Trigger Police, Fire, or Emergency/Medical alarms using specific key combinations.
Toggle the system chime feature on or off using the keypad.
Adjust keypad contrast, brightness, and volume using menu options.
Change the keypad display language through a selection process.
Understand sound indicators for intrusion, fire, exit/entry delays, and operations.
Interpret chirp signals for system set, unset, or unset after alarm.
Interpret Power LED colors (Green, Red, Orange) for system states.
Understand Status LED states (Green, Orange) for system readiness and faults.
Interpret Communication LED states (Green, Orange) for connectivity and faults.
Identify Wireless Learn mode via sequence flash of all LEDs.
Understand icons for Cloud, Fault, Set/Alarm, Tamper, Ready, and Stay status.
Add, modify, or delete user codes and assign index numbers.
Register proximity tags to users by holding them near the keypad.
Steps to register the system panel and activate cloud service.
Log in to the RISCO Cloud web application using credentials.
Download and use the iRISCO smartphone application.
