Need help?Do you have a question about the Risco WiComm and is the answer not in the manual?
General| Category | Security System |
|---|---|
| Power Supply | 12V DC |
| Manufacturer | Risco |
| Remote Control | Yes, via mobile app |
| Backup Battery | Yes |
| Mobile App | Yes |
| Encryption | Yes |
| Operating Temperature | -10°C to +55°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Frequency | 433MHz or 868MHz (depending on region) |
Guide to using the RISCO Express Wizard for system programming and installation.
Recommendations for optimal placement of the control panel, avoiding interference.
Guidance on mounting magnetic contacts on wood, metal frames, and spacing.
Recommendations for mounting PIR detectors, including placement relative to appliances and doors.
Detailed steps for opening the sensor, inserting a new battery, and reassembling.
Detailed steps for opening the PIR detector, inserting batteries, and reassembling.
Process for allocating (enrolling) additional wireless accessories to the system.
Instructions for logging into the iRISCO website using email, password, and system PIN.
Steps to set the system's time zone and time format via the website.
Guide to adding or editing user codes and their permissions via the website.
Explains different authority levels (User, Arm Only, Cleaner, Duress) for user access.
Instructions on how to edit and rename zone labels for detectors via the web interface.
To Next Page