Need help?Do you have a question about the Risco ProSYS series and is the answer not in the manual?
General| Communication | IP, GSM, PSTN |
|---|---|
| Wireless Protocol | Two-way wireless |
| Battery Backup | Yes |
| Remote Control | Yes, via app |
| Integration | RISCO Cloud |
An overview of the ProSYS integrated security system, its features, and capabilities.
Diagram illustrating the ProSYS system's components and their interconnections.
Description of the ProSYS Main Panel's foundational role and key features.
Overview of ProSYS keypad types, features, and functionalities for system interaction.
Explanation of ProSYS event logging capabilities for tracking system events and alarms.
Instructions for physically installing the ProSYS Main Panel unit.
Procedures for connecting various components to the ProSYS Main Panel.
Configuration guide for internal ProSYS jumpers to set up system functionality.
Guidance on identifying and connecting ProSYS keypads and expansion modules.
Instructions for adding various ProSYS system modules like zone and utility output expanders.
Detailed steps for wiring power supply expansion modules for system power management.
Guide on operating the ProSYS system and accessing programming via the LCD keypad.
Steps to enter the ProSYS installer programming mode for system configuration.
Procedure to reset ProSYS programming to factory default settings.
Configuration options for overall system parameters, including time, control, and version.
Programming parameters for each protected zone, including type, sound, and response.
Management of user codes, authority levels, and installer/sub-installer codes.
Setup for ProSYS communication with monitoring stations and data transmission.
Programming codes transmitted to the MS for various event types.
Procedures for adding or deleting ProSYS system accessories like keypads and modules.
Test to check communication quality between the ProSYS Main Panel and connected devices.
Automatic configuration of system accessories connected via the BUS scanning feature.
Parameters for configuring ProSYS rolling code wireless key-fobs.
Configuration of the GSM/GPRS module for cellular communication and data transmission.
Setting parameters for each door within the ProSYS Access Control module.
Specification of the card code reading position for Magnetic/Barcode technologies.
Access to user-level functions and parameters for installers.
Options to view system status, troubles, and event logs.
Access to system maintenance functions like keypad tests and diagnostics.
Procedure for playing and recording voice messages for zones, partitions, and outputs.
Technical specifications and dimensions for the ProSYS Main Panel.
Technical specifications for ProSYS power supply expansion modules.
List of available ProSYS keypads and their descriptions.
List of ProSYS wireless transmitters and their functionalities.
Report codes for ADEMCO POINT (CONTACT) ID communication format.
Report codes for SIA communication format.
Map of installer programming options for the System menu.
Map of installer programming options for the Zones menu.
Map of installer programming options for the Dialer menu.
Map of installer programming options for the Accessories menu.
Map of installer programming options for the Access Control menu.
To Next Page
