ProSYS Installation and Programming Manual 167
Accessories: Add Delete Module
Quick Keys Parameter Default Range
2. Use the / or / keys to position the cursor
over ID=1 and type in the Bus Zone ID number that you are assigning or
deleting.
NOTE:
Make sure that the detector's physical ID number is identical to the ID number you
select during programming.
3. Place the cursor over the TYPE field, and press the / key
to toggle and choose from the options provided, as follows:
 NONE
 OPR12 (WatchOUT PIR detector)
 ODT15 (WatchOUT DT detector)
 WatIN (WatchIN DT detector)
 ILUN3 (Industrial Lunar Grade 3 detector)
 iDTG3 (iWISE DT Grade 3 detector)
 iQDG3 (iWISE QUAD Grade 3 detector)
4. Press
/ to confirm. Repeat the process for the other BUS
detectors.
NOTE:
If BUS detector is found and NONE has been selected, Press / to
return to the prior display -OR- Press the / key to select [Y] YES
and press / to confirm the delete.
77
11
99
66
GSM/GPRS Module
1. Press [6]. The following display appears:
GSM MODULE:
TYPE=NONE
GSM MODULE:
TYPE=NONE
2. With the cursor positioned at the TYPE field, use the / key
to toggle and choose the GSM option.
3. Press
/ to store your choice.
NOTE:
If GSM/GPRS module is found and NONE has been selected, Press /
to return to the prior display -OR- Press the / key to
select [Y] YES and press / to confirm the delete.
To Next Page
Loading...
Need help?
General
