ProSYS Installation and Programming Manual 191
Activities
Quick Keys Parameter Range
received and the keypad functions as a GSM telephone.
You can dial and listen to messages as with a regular telephone.
To end the call press on the
/ button
Notes:
1. The outgoing call will always be executed trough the GSM channel.
2. Talking is not optional during the call.
3. This option can be used to get any provider information. The call can be
established to any phone number.
4. When using this feature on a non full GSM/GPRS version module the outgoing
call will be executed through the PSTN line (if connected to the panel).
33
View
After you access the View menu from the main User Programming menu, as described in this
section, you can access the following parameters:
33
11
Trouble, page 191
33
33
Not Ready Status, page 192
33
44
Zone Status, page 192
33
55
Event Log, page 192
33
66
Service Info, page 192
 To access the View menu:
From the main User Programming menu, press [3], or press the / or /
keys until you find the number [3] View option and then press / .
The first submenu (Trouble) appears:
VIEW:
1) TROUBLE
You are now in the View menu and can access the required parameters, as described
below.
iew
Quick Keys Parameter Range
33
11
Trouble
This parameter displays problems detected by the system as
indicated by a rapid flashing of the Power LED while the system is
in the disarmed state. Refer to the ProSYS User’s Manual for a list
of trouble conditions and their descriptions. If a down arrow
appears, other troubles exist. Scroll down using the
/
key to view the next ones.
To Next Page
Loading...
Need help?
General
