Risco ProSYS series User Manual

ProSYS Installation and Programming Manual 87
Zones Miscellaneous: BUS Zone – iWISE DT Grade 2
Quick Keys Parameter Default Range
22 00 33 ZZZZ 22 MW (Microwave) Range
Trimmer
Defines the microwave channel range.
[1] Minimum [2] 25% [3] 50% [4] 65% [5] 85% [6] Maximum [7] Trimmer (MW is
defined by the trimmer setting on the PCB)
22 00 33 ZZZZ 33 ACT
No
Defines the Anti-Cloak™ Technology (ACT) operation mode.
[1] No - Disables the ACT mode.
[2] Yes - Enables the ACT mode.
22 00 33 ZZZZ 44
Automatic Microwave
Bypass
No
Defines whether the MW channel will be bypassed or not while the detector
identifies trouble in the MW channel.
[1] No - While detecting a problem in the MW channel it is not bypassed. Alarm
condition cannot be established until the MW channel is fixed.
[2] Yes - Switches the detector to operate only in PIR mode in case of MW
trouble.
22 00 33 ZZZZ 55 Green Line
Yes
A feature that follows environmental guidelines by avoiding surplus emission
This feature defines the activation of the microwave channel while the system
is disarmed.
[1] No - Green Line feature is disabled. MW is constantly activated.
[2] Yes - Green Line feature is activated.
22 00 33 ZZZZ 66 Self Test
Remote
Used to test the detection technologies. In the event of a failed test, a Self Test
Trouble is created
[1] Remote (Manual) - The remote self test is performed by the system when a
user manually selects the Diagnostics option from the Maintenance menu via
the ProSYS User Functions menu
[2] Local (automatic) - Once an hour, the detector automatically checks that the
detector’s channels are functioning properly.
Zones Miscellaneous: BUS Zone – Lunar Grade 3/iWISE DT Grade 3
Quick Keys Parameter Default Range
22 00 33 ZZZZ 11
LEDS
On
Defines the LEDS operation mode.
[1] Off - Disables the LEDS operation.
[2] On - Enables the LEDS operation.
22 00 33 ZZZZ 22 MW (Microwave) Range
Trimmer
Defines the microwave channel range.
[1] Minimum [2] 25% [3] 50% [4] 65% [5] 85% [6] Maximum [7] Trimmer (MW is
defined by the trimmer setting on the PCB)

Risco ProSYS series Specifications

General

Communication	IP, GSM, PSTN
Wireless Protocol	Two-way wireless
Battery Backup	Yes
Remote Control	Yes, via app
Integration	RISCO Cloud