Risco ProSYS series User Manual

ProSYS Installation and Programming Manual 121
Dialer: Controls
Quick Keys Parameter Default
55 55 1111 UL Installation
NO
Y
ES: Disables features inappropriate for UL listed installations. This feature
disables the use of Upload/Download and permits a status display only when
remotely accessed.
NO: No features are disabled.
55 55 1212
Show Kissoff
NO
Y
ES: All five LEDs on the right side of the keypad(s) light for one second when
the dialer receives the kissoff signal from the
MS’s receiver.
NO: The LEDS do not light up on receipt of the kissoff signal.
55 55 1313 Show Handshake
NO
Y
ES: All five LEDs on the right side of the keypad(s) light up for one second
w
hen the dialer receives the handshake signal from the MS's receiver.
NO: The LEDS do not light up on receipt of the handshake signal.
55 55 1414 Audible Kissoff
NO
Y
ES: There is an audible sound emitted from the keypad when the dialer
receives the kissoff signal from the MS’s receiver.
NO: There is no audible sound on receipt of the kissoff signal.
55 55 1515
Upload /Download GSM
Enable
NO
This option allows performing remote Uploading /Downloading using the
GSM/GPRS module through the data channel.
NOTE:
The data channel on the SIM card must be enabled.
Y
ES: Enables communication between the MS and the ProSYS using the U/D
software over the GSM data channel.
NO: Disables communication through the GSM data channel.
55 55 1616 X. Modem Enable
NO
This option enables connection to the client’s premises from a remote location
using the Upload/Download software via a phone connection using a fast
modem.
Y
ES: Connection to the client’s premises is available
NO: Connection to the client’s premises is not available
NOTE:
When using this option, ensure that [5][5][15] Upload/Download GSM Enable is
set to No.
55 66
Dialer: Parameters
The Parameters menu contains parameters that enable the system to control additional
aspects of the ProSYS dialer operation.
 To access the Parameters menu:
1 Access the Dialer menu, as described on page 110.

Risco ProSYS series Specifications

General

Communication	IP, GSM, PSTN
Wireless Protocol	Two-way wireless
Battery Backup	Yes
Remote Control	Yes, via app
Integration	RISCO Cloud