ProSYS Installation and Programming Manual 5
Chapter 1 Introducing ProSYS
This chapter provides a basic introduction to the ProSYS system and its architecture and
capabilities, as described in the following sections:
♦ What is ProSYS?, below
♦ Installing ProSYS, page 6
♦ About Wire, page 6
♦ ProSYS Architecture and Capabilities, page 9
♦ ProSYS Features, page 10
What is ProSYS?
ProSYS is an integrated security system with unrivalled flexibility and advanced
expansion capabilities, together with being simple to install, program and maintain.
ProSYS features integrated Dual-Path and Triple-Path reporting, with integrated Advanced
Communication Modules (ACM) for IP communication, Advanced GSM/GPRS modules
(AGM) for advanced cellular communication all in one box, and an IP/GSM Receiver package
for Monitoring Stations (MS).
Additional accessories include integrated Access Control, Interactive Voice Module, 868/433
MHz Wireless expansion, Bus detectors providing Remote Control & Diagnostics, Program
Transfer Module, Printer adaptors for parallel printers and more.
ProSYS provides a new level of remote service and installation convenience, with unique
Remote Diagnostic capabilities, Auto-Installâ„¢ Technology and Bus Test which checks
communication quality of the bus and enables pinpointing intermittent wiring faults.
ProSYS can be programmed and/or controlled through the Upload/Download software
installed on a PC computer with a Windows operating system.
To Next Page
Loading...
Need help?
General
