ProSYS Installation and Programming Manual 77
Zones: Maintenance
Quick Keys Parameter
22
99
22
Delete a Zone
Deactivates a designated zone by setting its Zone Type to Not Used, while
maintaining all the previously programmed parameters.
1. Press [2].
2. Use the
/ or
/
keys or the [1 to 9] keys to
select the zone that is to be deleted. This process can also be used to
temporarily disable a zone from the protection scheme.
3. Confirm your choice by selecting either [Y] YES or [N] NO and pressing
/ .
4. Press the
key to exit. The process is executed as the display is
changed.
22
99
33
Add/Copy Partition
Assigns, to a designated partition, all the zones (and their respective
parameters) belonging to a specified partition, while keeping the original
partition intact.
For example, copying Partition 1 to Partition 2 simply duplicates all Partition 1's
zones in Partition 2.
1. Press [3].
2. Use the cursor keys to select the source and destination partitions.
Using this function provides no confirmation before advancing to another
Add/Copy Partition opportunity.
3. Press the
key to exit. The process is executed as soon as the display
is changed.
22
99
44
Delete a Partition
Deletes a designated partition. Selecting this option removes all zones
assigned to it, effectively removing the partition from the system.
1. Press [4].
2. Use the cursor keys to select the partition that you want to delete.
3. Confirm your choice by selecting either [Y] YES or [N] NO and pressing
/
.
4. Press the
key to exit.
To Next Page
Loading...
