10 ProSYS Installation and Programming Manual
ProSYS Features
This section describes the features of the ProSYS system, including features specific to each
ProSYS model.
Feature-Specific Limitations
Each ProSYS model has several feature-specific limitations, as described in the following
table:
Feature ProSYS 16 ProSYS 40 ProSYS 128
Total Zones 8-16 8-40 8-128
Main Expansion Zones (wired
or wireless)
1x8
(EZ or WR)
4x8 or 2x16 or
2x8 + 1x16
(EX or WR)
1x8 + 7x16
(EX or WR)
Max BUS Zones 16 32 32
Max Current 1,5 A 1,5 A 1,5 A
Number of Expansion BUSes 2 2 2
Total Number of Expansion
Modules
64 (32 for each data
BUS)
64 (32 for each data
BUS)
64 (32 for each data
BUS)
Box NC Tamper Input 1 1 1
Bell Tamper EOL Input 1 1 1
Total Utility Outputs 6-22 6-38 6-70
Utility Output Expansion
Modules
Up to 2 modules
(max 16 UO)
Up to 4 modules
(max 32 UO)
Up to 8 modules (max
64 UO)
Partitions/Areas 4 4 8
Groups Per Partition/Area 4 4 4
User Codes 00-29 00-59 00-98
Access Control Modules
(# of Doors)
2 (4 doors) 4 (8 doors) 8 (16 doors)
Proximity Key Reader 16 16 16
Keypads 8 12 16
Account Numbers 8 8 12
Follow Me Numbers 8 8 16
Event Log
256 Built-in (No
Possible Expansion)
512 (with Expansion) 999 (with Expansion)
GSM/GPRS Communication
Module
1 1 1
IP Communication Interface
(ACM)
1 1 1
NOTES:
The zone expansion modules can be either with wire or wireless.
All panels can work with a battery of up to 17AH according to the applicable regulations.
The relay output should have the option to supply COM positive -12V or negative -0V.
To Next Page
Loading...
Need help?
General
