194 ProSYS Installation and Programming Manual
Maintenance
Quick Keys Parameter Range
44
00
22
Accessories Versions
This parameter enables viewing the current versions of ProSYS
accessories:
[1] BUS Zone versions
[2] Power Supply version
[3] Siren version
[4] Proximity Key Reader version
[5] GSM version
44
00
33
Get ACM IP
View the ACM IP address. Required for establishing remote
communication for U/D through the IP network.
44
00
44
Pre-paid SIM
When using Pre-paid SIM cards use this menu to program the
parameters to be able to receive information regarding the SIM card
credit level
[1] SMS Message: When performing manual Credit Level check this
message will be sent to the provider in order to receive the SIM card
credit. The message is predefined (for example “BILL”) by your service
provider.
[2] SMS Send Phone: The provider’s phone number to which the credit
level SMS message will be sent to, when performing manual credit
level check or a service command.
Note:
When using a service command this field is ignored.
[3] The provider’s telephone number from which an automatic SMS
credit status message will be sent from. This telephone number has to
be defined otherwise the incoming SMS credit status message will be
blocked.
Note:
When using a service command, use both the SMS send phone and SMS
receiving phone fields to enter the command number (Exampe: *100#).
99
Miscellaneous : Voice
After you access the Miscellaneous menu from the main User Programming menu, as
described in this section, you can access the Voice Message menu.
99
44
Voice Message
This section describes how to play, record and test the spoken messages that ProSYS
announces when you access the system from a remote telephone or hear them locally on the
premises.
Only the installer or a user with the Grand Master authority level can program the messages.
To Next Page
Loading...
Need help?
General
