168 ProSYS Installation and Programming Manual
Accessories: Add Delete Module
Quick Keys Parameter Default Range
77
11
99
77
X.Modem
The Fast PSTN Modem enables PSTN communication at 2400 Bps
between a remote PC and the ProSYS security panel when programming
the system using the Upload/Download software.
1. Press [7]. The following display appears:
XModem MODULE:
Type=XModm
2. With the cursor positioned at the TYPE field, use the
/ key
to toggle and choose the XModm option.
3. Press
/ to store your choice.
77
22
Accessories: Verify Module
The Verify Module menu provides a verification list of the modules in accordance with the
modules you defined in the Add Delete Module menu (page 154) or in the Auto Settings
menu (page 170).
 To access the Verify Module menu:
1 Access the Accessories menu, as described on page 154.
2 From the Accessories menu, press [2] to access the Verify Module menu options. The
following display appears:
3 Use the
/ or / keys to scroll down the list of displayed
accessory devices (shown in the examples below) to ascertain that all keypads and
expansion modules in the installation have been identified correctly.
The system displays each programmed device, its address, and whether or not it's
found on the BUS. This helps you to identify programming mistakes.
77
33
Accessories: BUS Test
The BUS Test menu enables the ProSYS to check the communication between the Main
Panel and each of the system's keypads and expansion modules.