ProSYS Installation and Programming Manual 173
8 Set the parameters for the UO Key #4 from the following options:
O NONE: The key is disabled (default).
O AWAY: The key is used for AWAY arming the assigned partitions.
O STAY: The key is used for STAY arming the assigned partitions.
O GROUP: The key is used for GROUP arming the assigned partitions
O UO: The key is used to operate a Utility Output. When selecting this option, you must
select a Utility Output:
NOTE:
Away or STAY arming can be defined as instant or delayed (Exit Delay).
9 After selecting the required option, press / .
10 Repeat the procedure to program the other wireless buttons.
88
11
22
Wireless Button Allocation
Default: NONE
This procedure is required when using a 4-key wireless transmitter.
 To access the Wireless Button Allocation menu:
1 Access the Miscellaneous menu, as described on page 170.
2 From the Miscellaneous menu, press [2] to access the Wireless Button Allocation
menu options. The following display appears:
3 Use the
/ or / keys to position the cursor and make any
changes to the Button Number you wish to learn-in to the system.
4 Press
/ .
5 Select the appropriate option, as follows:
O Press
/ or press [1] to move to the next button. The following display
appears:
-OR-
O Press
/ or press [2] to write (or overwrite) data into the selected location.
The following display appears:
-OR-
O Press [3] to erase the data in the selected location. The following display appears:
To Next Page
Loading...
Need help?
General
