Risco ProSYS series User Manual

180 ProSYS Installation and Programming Manual
GSM Parameters
Quick Keys Parameter Default
When communication to MS#1 fails, polling occurs every 90 seconds
according to the backup interval to MS#2. When communication returns to
MS#1, polling reverts back to the secondary time interval and occurs every
3600 seconds (1 hour) to MS#2.
88 33 11 55 44
11
GPRS Primary
00009 (x10 sec) 0-65535 sec
Defines the polling interval through the primary channel. When using the
default time, a polling message is sent every 90 seconds.
When the GPRS Primary polling time is defined as 0, no polling message is
sent to the MS (when the MS channel is in the Primary polling mode).
88 33 11 55 44
22
GPRS Secondary
00360 (x10 sec) 0-65535 sec
Defines the polling interval through the secondary channel. When using the
default time, a polling message is sent every 3600 seconds (1 hour).
When the GPRS Secondary polling time is defined as 0, no polling message is
sent to the MS (when the MS channel is in the Secondary polling mode).
88 33 11 55 44
33
GPRS Backup
00009 (x10 sec) 0-65535 sec
Defines the polling interval through the backup channel. When using the
default time, a polling message is sent every 90 seconds.
When the GPRS Backup polling time is defined as 0, no polling message is
sent to the MS (when the MS channel is in the Backup polling mode).
88 33 11 66 Email
The following programming parameters ([8][2][1][6][1]) to ([8][2][1][6][6]) are
used to enable sending Follow Me event messages by e-mail through GPRS
Note:
1. To enable e-mail messaging, the GPRS parameters have to be defined (see
Quick Key [8][2][1][5]).
2. Sending e-mails is possible only through servers that do not require user
authentication.
88 33 11 66 11
SMTP IP address
000.000.000.000
The IP address of the SMTP mail server
88 33 11 66 22 SMTP port
00000 00000-65535
The port address of the SMTP mail server
88 33 11 66 33 SMTP User name
A name identifying the user to the SMTP mail server
The user name field can include up to 10 alphanumeric characters and
symbols (!, &, ? etc). Provision for future functionality
.
88 33 11 66 44 SMTP Password
The password authenticating the user to the SMTP mail server
The password can include up to 10 alphanumeric characters and symbols
(!, &, ? etc). Provision for future functionality

Risco ProSYS series Specifications

General

Communication	IP, GSM, PSTN
Wireless Protocol	Two-way wireless
Battery Backup	Yes
Remote Control	Yes, via app
Integration	RISCO Cloud