ProSYS Installation and Programming Manual 123
Dialer: Parameters
Quick Keys Parameter Default Range
55
66
55
11
Wait 5 Seconds
Select [1] and press / .
55
66
55
22
Wait 60 Seconds
Select [2] and press / .
55
66
66
Dialing Method
DTMF DTMF (Touch
Tone ®), Pulse @ 20 BPS,
and Pulse @ 10 BPS
When selecting the dialing method, your choice must be compatible with the
type of phone service available at the protected premises.
Use the
/ or / keys to choose between the
options.
55
66
66
11
DTMF (Touch Tone ®)
Select [1] and press / to activate the DTMF dialing method.
55
66
66
22
Pulse @ 20 BPS (pulses per second)
Select [2] and press / to activate the Pulse @ 20 BPS dialing
method.
55
66
66
33
Pulse @ 10 BPS (pulses per second)
Select [3] and press / to activate the Pulse @ 10 BPS dialing
method.
55
66
77
Pulse Duty Cycle
61/39% 67/33% and 61/39%
For pulse dialing, choose the proper dialing duty cycle for the location, as
described below.
55
66
77
11
67/33%
Select [1] and press / for European telephone systems.
55
66
77
22
61/39%
Select [2] and press / for USA telephone systems.
55
66
88
Swinger Limit (Swinger
Shutdown)
00 00 to 15
A swinger is a repeated violation of the same zone, often resulting in a
nuisance alarm and usually due to a malfunction, an environmental problem, or
the incorrect installation of a detector or sensor.
This parameter specifies the number of violations of the same zone reported
during a single armed period, before the zone is automatically bypassed.
NOTE:
Enter 00 to disable the swinger shutdown.
To Next Page
Loading...
