16 WisDom User Manual
Fault LED
The Fault LED indicates faults in the system.
Condition Description
RAPID FLASH
There is at least one fault in the system.
OFF
No faults in the system.
NOTE:
If a fault condition exists, the Fault LED will flash only when the Fault LED
option ON is unset and option OFF is set. Once the system is set, a previously
flashing Fault LED will light steadily.
Message LED
The Message LED indicates a newly recorded message in the system.
Condition Description
SLOW FLASH
Listen-in mode during 2-way
communication.
RAPID FLASH
There is a new message
or when talking
during 2-way communication.
OFF
There is no new message.
Keys Functionality
The keys on the WisDom can be used for a variety of functions. Each
key is explained below.
Numerical Keys
Numerical keys are used to input the numeric codes that may be
required for setting, unsetting, or used to activate special functions
To Next Page
Loading...
