Risco WisDom - Receiving Calls from the System

WisDom User Manual
35
¾ To Remotely Record a Message:
1)
The Family Message Center enables you to record and store
1 message up to 8 seconds long. When you record a new
message, the previous message is deleted:
2)
From the Operations menu, press [7].
3)
Press [2]. The following message appears announced.
“Press [#] to start and stop recording “
4)
Press [#] and state your message into the telephone receiver
5)
Press [#] when you have finished your message. The
following message is announced:
“You have a new Message. To play the message, Press
1, to record a message, press 2”.
6)
Press [1] to listen to the message you have just recorded
or press [*] to return to the Operations menu.
When accessing the Family Message Center option, “You
have a new message” is announced. This changes to “You
have no new message” when a user with a different user
code to the user who recorded the message plays the
message.
NOTE:
The MESSAGE LED in the WisDom flashes rapidity when a new message
has been recorded. The LED turns off after the message has been heard.
When you record a new message, the previous message is deleted.
Receiving Calls from the System
Upon event occurrence, such as alarm activation, the system informs
you of security situations such as intrusion or fire, by calling you and
announcing a pre-recorded event announcement message, followed by
the Acknowledge menu, as described on page 36.
The system can call up to 4 Follow Me numbers, enabling you, a
relative or neighbour to be informed of the security situation.