38 WisDom User Manual
Chapter 5: User Codes
To perform many of the WisDom functions, a security code (often
called a user code) must used. Each individual using the system is
assigned a user code, which, in turn, is linked to an Authority Level.
Those with a "higher authority" have access to a greater number of
system functions, while those with a "lower authority" are more
restricted in what they may do. There are eight different Authority
Levels available for users of the WisDom.
User codes may have variable lengths up to 6 digits, according to your
engineer's definition. The WisDom can support up to 32 different user
codes.
Your WisDom was given a Grand Master Code of 1-2-3-4 during
manufacturing. Unless your alarm company has already changed it to
suit your preference, it's best to modify this code to one that is unique
and personalized as herein described.
NOTE:
To define the authority levels refer to your engineer.
Setting / Changing User Codes
The user assigned the Grand Master Authority Level can change all
user codes but cannot view the digits in the user codes. Users with
other Authority Levels can only
change their own codes. The system
must be unset in order to set or change user codes.
¾ To change a user code:
1)
From the User Functions menu, select [5] Codes.
2)
Enter code and press .
NOTE:
If you enter wrong user code, the keypad produces three short beeps
and the “Wrong Code. Please Try Again” message will be heard. If
so, press [ ] [ ] quickly and re-enter the above sequence
correctly.
3)
Select [1] for User Codes.
4)
Select [1] Define/Update.
To Next Page
Loading...
